Posts Tagged ‘mounts’

« Older Entries

CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKET FOR 32-55″ DISPLAYS UP TO 165LBS BLACK

Monday, June 28th, 2010


Great mount!
Pros:
Bought it to install a 40" tv, but meanwhile had upgraded to a 60" Sony led lcd tv (don't ask, long story). The mount handles the bigger tv without any problems.

Was very easy to install (and I'm a complete newbie DIYer) contrary to what some of the reviews here say.

Heavy and sturdy.

Cons:
If you're in the US, good luck finding a drill bit that fits the 13mm lag bolts provided. You'd be better off getting new lag bolts from home depot of the same size or using a plain ol' wrench.

Bolts weren't labeled correctly per the instructions. Instructions said that part A should be lag bolts, but the actual plastic bag for lag bolts was labeled part B. Minor quibble.

CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKET FOR 32-55\



Average Rating:
Brand: Cheetah
Model: APDAM2B

Product Description:
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 5". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. Thus, the arms may be visible on the sides of 32" units. The universal design will fit any display with a hole pattern up to 26.3" wide and 18" tall. The wall plate is 1/8" thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.

Features:
  • Very Substantial Mount, Over 30Lbs Of Steel
  • Dual Arms Extend To Over 20" Fold To Less Than 5"
  • 120 Degree Swivel, +-15 Degree Tilt
  • Display Up TO 180Lbs
  • Installation Manual And All Hardware Included
Special Features:
  • High quality powder coat finish
  • Hole Pattern Coverage: Up To 28" Horizontal by 19" Vertical or VESA 100x100, 200x200, 300x300, 400x400 and 400x600
  • Unit Weight: Net: 31 LBS Gross: 31 LBS
  • Unit Materials: Arms, Wall Plate and TV Plate: 100% High Grade Steel
  • Tilt Range: +/- 20°
  • Total Rotation: 180°
  • Arm Extension/Collapsed Distance: Fully Extended: 21"
  • Wall Plate Dimensions: 18.75 x 10.5"
  • Cable Management: 6.25 x 5"
  • TV Arm Dimensions: 19.75" x 1.75"
Available at Amazon
List Price: USD 360.00
Lowest New Price: USD 55.00

Customer Reviews


Nice Cheetah... Good Cheetah
If you are trying to save money and are DIY, then this is the right mount for you!


Sleek and Strong
This piece of equipment could arguably be used to mount a screen larger than 55" if fastened to wall studs. I have a 55" Sony Bravia mounted to the one I purchased and its solid construction and durability assure me that I will never have to worry about the TV falling off the wall. A fine piece of equipment and the Price is much better than those available at the store. I would recommend this brand and product to anyone looking to mount a flat screen!


Great design
This is a great design and easy to install. I was impressed overall, both with how fast it came and how easily I had my 43" plasma upon on the wall and viewable. As an added bonus, I swivel the TV over to face my laptop, plug in, and have plenty of extra desktop space when we're not watching movies.


Nice
does everything it says it does. easy to setup. we put up 55" LCD up with it and works great. It is so stable that it feels like you could do pullups on it.

Tags: , , , , , , , , ,
Posted in CHEETAH | No Comments »

Cheetah Mounts APTMMB Tilt Wall Mount for 32″-55″ Plasma and LCD Displays

Sunday, March 14th, 2010


hey amazon, so let me break it down to you in my bed toom i got a 46ich toshiba lcd i got from best buy and its on the wall and i got wall mount and istalling i got a package deal
so the wall mount was nearly 150$

ok so i wanted changed my living room around and i didnt feel like paying 0 bucks plus installing $
so now i took a shot with this mount and trusting it to hold the tv
its been 4 days now not 1 problem at all
installing was easy as can be (if you have a drill and your own tools ) need 2 ppl to hold tv and put it on the wall

so my review is, from the best buy wall mount to the cheetah
the best buy one, if i wanna tilt it more i can just go to the side to move it
the cheeath wall mount (IT SAYS IT IN THE BOOK SET IT B4 YOU PUT IT ON THE WALL) you can only set it one time if you wanna move it you gont to take it a part
thats the only down about the mount !
but for the price of it its sitll good cause i did everything right i looked everything over read the book set the hangers

so if you unsure and think its "unsafe" and why its so cheap ?> i was thinking the same
best buy sells them for 0 i'am sure they get it for anywhere 50-60 bucks and they make money on everyone
and i took a shot with cheeath and its good as my other wall mount in my bed room from best buy as my review scroll up and you can see what i said about both of them


thank you




Cheetah Mounts APTMMB Tilt Wall Mount for 32\

Product Description:
The APTMM tilt mount features a universal design that fits most LED/LCD/Plasma displays from 32 to 55". Specifically, the APTMM supports hole patterns up to 27.7" horizontally by 19" vertically as well as VESA hole patterns up to 600x400mm. The APTMM is designed with a slim 1.9" profile as well as 15 degrees of downward tilt depending upon the size of your TV. The APTMM is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM solid wall plate allows for quick and easy installation and will support installation to studs up to 28" apart (most homes are constructed with either 16" or 24" wood studs).

Features:
  • Universal Design Fits Most 32-55inch TVs and holds up to 165lbs
  • Flat 1.9" Profile and 15°of Forward Tilt
  • Free 6" 3-Axis Magnetic Bubble Level
  • Supports up to 165LBS
  • All Installation Hardware Included
Special Features:
  • Hole Pattern Coverage:28" Horizontal by 19" Vertical or VESA 100x100, 200x200, 300x300, 400x400, and 400X600
  • Unit Weight: Net: 8LBS Gross: 9 LBS
  • Unit Materials: Arms, Wall Plate: 100% High Grade Steel
  • Tilt Range: 0-15° Downward
  • Wall Plate Screw Slots: 1.5" Wide by 0.5" Apart
  • Profile From Wall: 1.9"
  • Openings for Cable Pass-Through (cable Management): Two 11.5" by 4.6" Openings
  • TV Arm Dimensions: 20" x 1.75"
  • Wall Plate Dimensions: 30" Horizontal by 9.5" Vertical
Available at Amazon
List Price: USD 99.99
Lowest New Price: USD 17.69

Tags: , , , , ,
Posted in CHEETAH | No Comments »

CHEETAH MOUNTS PLASMA LCD TV ARTICULATING DUAL ARM WALL MOUNT FOR 32-63″ DISPLAYS UP TO 165LBS BLACK

Wednesday, March 3rd, 2010


Great mount!
Pros:
Bought it to install a 40" tv, but meanwhile had upgraded to a 60" Sony led lcd tv (don't ask, long story). The mount handles the bigger tv without any problems.

Was very easy to install (and I'm a complete newbie DIYer) contrary to what some of the reviews here say.

Heavy and sturdy.

Cons:
If you're in the US, good luck finding a drill bit that fits the 13mm lag bolts provided. You'd be better off getting new lag bolts from home depot of the same size or using a plain ol' wrench.

Bolts weren't labeled correctly per the instructions. Instructions said that part A should be lag bolts, but the actual plastic bag for lag bolts was labeled part B. Minor quibble.

CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKET FOR 32-55\



Average Rating:
Brand: Cheetah
Model: APDAM2B

Product Description:
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 5". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. Thus, the arms may be visible on the sides of 32" units. The universal design will fit any display with a hole pattern up to 26.3" wide and 18" tall. The wall plate is 1/8" thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.

Features:
  • Very Substantial Mount, Over 30Lbs Of Steel
  • Dual Arms Extend To Over 20" Fold To Less Than 5"
  • 120 Degree Swivel, +-15 Degree Tilt
  • Display Up TO 180Lbs
  • Installation Manual And All Hardware Included
Special Features:
  • High quality powder coat finish
  • Hole Pattern Coverage: Up To 28" Horizontal by 19" Vertical or VESA 100x100, 200x200, 300x300, 400x400 and 400x600
  • Unit Weight: Net: 31 LBS Gross: 31 LBS
  • Unit Materials: Arms, Wall Plate and TV Plate: 100% High Grade Steel
  • Tilt Range: +/- 20°
  • Total Rotation: 180°
  • Arm Extension/Collapsed Distance: Fully Extended: 21"
  • Wall Plate Dimensions: 18.75 x 10.5"
  • Cable Management: 6.25 x 5"
  • TV Arm Dimensions: 19.75" x 1.75"
Available at Amazon
List Price: USD 360.00
Lowest New Price: USD 55.00

Customer Reviews


Nice Cheetah... Good Cheetah
If you are trying to save money and are DIY, then this is the right mount for you!


Sleek and Strong
This piece of equipment could arguably be used to mount a screen larger than 55" if fastened to wall studs. I have a 55" Sony Bravia mounted to the one I purchased and its solid construction and durability assure me that I will never have to worry about the TV falling off the wall. A fine piece of equipment and the Price is much better than those available at the store. I would recommend this brand and product to anyone looking to mount a flat screen!


Great design
This is a great design and easy to install. I was impressed overall, both with how fast it came and how easily I had my 43" plasma upon on the wall and viewable. As an added bonus, I swivel the TV over to face my laptop, plug in, and have plenty of extra desktop space when we're not watching movies.


Nice
does everything it says it does. easy to setup. we put up 55" LCD up with it and works great. It is so stable that it feels like you could do pullups on it.

Tags: , , , , , ,
Posted in CHEETAH | No Comments »

CHEETAH MOUNTS PLASMA LCD TV TILT WALL MOUNT FOR 23-37″ DISPLAYS BLACK

Sunday, October 25th, 2009


I bought this to mount a 32" Panasonic Viera LCD on the wall in my bedroom. Perfect fit for the bolt pattern 200mm x 200mm. It included sets of (4) screws and lock washers in 3 different sizes plus a set of spacers to accommodate almost any flat screen. I had to use a set of the included screws, since the Viera does not come with any. Mounting the brackets was easy, but the screws were a little too long for the bottom 2 holes and bottomed out before becoming tight. I just added the larger lock washers from the set onto the screws for extra distance, and I was able to tighten them completely. I was mounting the set near the ceiling, so I just measured down from the ceiling how far I wanted the top of the set(leave at least 1 inch above set) and added the distance to the screw holes by setting the bracket on the back of set while it was face down. I did not use the level on the bracket, or the included level in the kit since I know that my ceiling is not totally level, and I was more concerned with the distance above the TV to look straight. I found the studs in the wall by using a stud finder, marked the centers, measured down from ceiling the total distance that I mentioned earlier, drilled 4 pilot holes with 3/16th drill bit, and screwed the lag screws with flat washers in using a ratchet. The bracket was not centered due to the stud locations, but was still not visible behind the TV.

When setting the angle of the brackets, do it on the unit while face down BEFORE you try to hang it on the bracket. There is NO ROOM to do it after. If you have to modify the angle, you will have to take it down to adjust it. Also, when assembling the main wall bracket, look at the picture in the book. The short metal brackets are for the sides, and attach the upper and lower brackets into a square (the upper bracket has the level in it).

WORD OF WARNING....DO NOT adjust the angle fully tilted, as the brackets will not clear the bottom bracket of the mount. It must clear it to tighten the lower securing screws from the bottom to prevent the hanging bracket(and your TV) from being knocked off the mount. You will need a pretty long screwdriver to reach the lower securing screws because of the limited distance behind the TV after mounting. Don't worry because the screws are very loose and only need to snug up against the mount to prevent it from falling off.

The cheetah mount is a very heavy powder-coated black, is extremely strong and can handle much more weight that my 32" LCD. I would recommend Cheetah mounts over any other mount out there. It costs less, and is much more durable.


CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV TILT WALL MOUNT BRACKET FOR 23-37\



Average Rating:
Brand: Cheetah
Model: APTMSB

Product Description:
The APTMS tilt mount features a universal design that allows you to mount the vast majority of LED/LCD/Plasma TVs in the 23-37" size range. Specifically, the APTMS supports hole patterns up to 17.25" horizontally by 12.25" vertically and VESA hole patterns up to 400x200mm. The APTMS is designed with a slim 1.9" profile yet still offers up to 15° of forward tilt. The APTMS is constructed with 5 LBS of 100% High Grade Steel providing a sturdy and reliable mount. The 19.25" wide wall plate will support two stud installation for studs up to 19" apart (most US homes have studs which are 16" apart). The two arm brackets attach to the TV separate from the wall plate allowing for easy "Lift n Lock" installation. Each arm bracket includes a safety screw to prevent accidental liftoff. The wall plate includes a built in bubble level and a separate 6" 3-Axis magnetic bubble level is provided as well. The paint is a high quality textured powder coat paint. The mount ships with all necessary mounting hardware.

Features:
  • Universal Design Fits Hole Patterns Up To 17" Horizontally And 12" Vertically
  • Tilts 0-15 Degrees
  • Low Profile 1.9" From Wall
  • Built In Bubble Level On Wall Plate
  • Installation Manual And All Hardware Included
Special Features:
  • Supported VESA Patterns/Hole Pattern Coverage: 17.25" Horizontal by 12.25" Vertical up to VESA 300x400mm
  • Unit Weight: Net: 5 LBS Gross: 6 LBS
  • TV Arm Dimensions: 13.25" x 1.5"
  • Unit Materials: Arms, Wall Plate and TV Plate: 100% High Grade Steel
  • Tilt Range: 15° Downward
  • Stud Installation: 16" Stud Construction
  • Profile From Wall: 1.9"
  • Wall Plate Dimensions: 19.25" x 6"
  • Cable Management: 18.5" x 2.5"
Available at Amazon
List Price: USD 74.99
Lowest New Price: USD 15.69

Customer Reviews


Good Mount
Easy install instructions, came with all parts, too many parts a lot was left over.
Study holds 32in lcd very easy. Installed on wall by myself but had to have help to mount the TV on the hooks. Good product for the money.


good deal
good deal for what you get. one of the screws that it came with could not be used due to a defect. other than that it works just fine and its a good alternative to buying one of those really expensive mounts.


Best Wall Mount Bang For Your Buck
A tilting wall mount under is unheard of. But based on other reviews I've read, I saw no reason to doubt that this would do the job it was intended for.

The first thing I noticed is that the mount is totally modular. I don't know if that plays into part of the cost difference, but every other wall mount I've ever installed (three prior to this one) has been a one-piece design. This one requires you to actually assemble the main section of the mount from four pieces. The finished, assembled product is square, sturdy and true. Overall gauge of the metal used seems adequate. Packaged hardware could have been better. Instead of including two molly bolts, a better selection of spacers (or short screws) would have been nice as the included screws for my set were far too long. I can't understand the need to include the two molly bolts since they're designed for hollow wall installations -- an installation you would not want your 60 pound flat panel supported by in any way.

Aside from the minor hardware gripe, the pre-installed level bubble was split open and empty on my mount. Even if it were intact, I'd still have a hard time trusting it to be completely accurate. Invest some money in a good 2' AND 4' level as these are tools that every home owner, DIY-type should have around the house. And although the included plastic torpedo level is a nice gesture, I would again encourage the use of a good quality 2' level.

The finished, installed mount is very solid. The only problem I ran into was turning the tilt lock-downs with the mount on the wall. There isn't enough clearance to spin them in complete rotations to make them tight. This somewhat defeats the purpose of a tilting mount if you have to take it off the wall to adjust the tilt. I tried various degrees of tightness before mounting so that I could still adjust the angle while being able to crank the adjusters down tight with it on the wall. I had no luck whatsoever. Either it was too tight or too loose. I had to mark the position with a pencil and then tighten it off the wall.

Bottom line: despite some minor design gripes, this is still the best wall mount money can buy. I intend to buy another Cheetah mount for my 50" plasma.

Tags: , , , ,
Posted in CHEETAH | No Comments »

CHEETAH MOUNTS PLASMA LCD TV ARTICULATING DUAL ARM WALL MOUNT FOR 32-63″ DISPLAYS UP TO 180LBS BLACK

Monday, September 28th, 2009


Great mount!
Pros:
Bought it to install a 40" tv, but meanwhile had upgraded to a 60" Sony led lcd tv (don't ask, long story). The mount handles the bigger tv without any problems.

Was very easy to install (and I'm a complete newbie DIYer) contrary to what some of the reviews here say.

Heavy and sturdy.

Cons:
If you're in the US, good luck finding a drill bit that fits the 13mm lag bolts provided. You'd be better off getting new lag bolts from home depot of the same size or using a plain ol' wrench.

Bolts weren't labeled correctly per the instructions. Instructions said that part A should be lag bolts, but the actual plastic bag for lag bolts was labeled part B. Minor quibble.

CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKET FOR 32-55\



Average Rating:
Brand: Cheetah
Model: APDAM2B

Product Description:
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 5". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. Thus, the arms may be visible on the sides of 32" units. The universal design will fit any display with a hole pattern up to 26.3" wide and 18" tall. The wall plate is 1/8" thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.

Features:
  • Very Substantial Mount, Over 30Lbs Of Steel
  • Dual Arms Extend To Over 20" Fold To Less Than 5"
  • 120 Degree Swivel, +-15 Degree Tilt
  • Display Up TO 180Lbs
  • Installation Manual And All Hardware Included
Special Features:
  • High quality powder coat finish
  • Hole Pattern Coverage: Up To 28" Horizontal by 19" Vertical or VESA 100x100, 200x200, 300x300, 400x400 and 400x600
  • Unit Weight: Net: 31 LBS Gross: 31 LBS
  • Unit Materials: Arms, Wall Plate and TV Plate: 100% High Grade Steel
  • Tilt Range: +/- 20°
  • Total Rotation: 180°
  • Arm Extension/Collapsed Distance: Fully Extended: 21"
  • Wall Plate Dimensions: 18.75 x 10.5"
  • Cable Management: 6.25 x 5"
  • TV Arm Dimensions: 19.75" x 1.75"
Available at Amazon
List Price: USD 360.00
Lowest New Price: USD 55.00

Customer Reviews


Nice Cheetah... Good Cheetah
If you are trying to save money and are DIY, then this is the right mount for you!


Sleek and Strong
This piece of equipment could arguably be used to mount a screen larger than 55" if fastened to wall studs. I have a 55" Sony Bravia mounted to the one I purchased and its solid construction and durability assure me that I will never have to worry about the TV falling off the wall. A fine piece of equipment and the Price is much better than those available at the store. I would recommend this brand and product to anyone looking to mount a flat screen!


Great design
This is a great design and easy to install. I was impressed overall, both with how fast it came and how easily I had my 43" plasma upon on the wall and viewable. As an added bonus, I swivel the TV over to face my laptop, plug in, and have plenty of extra desktop space when we're not watching movies.


Nice
does everything it says it does. easy to setup. we put up 55" LCD up with it and works great. It is so stable that it feels like you could do pullups on it.

Tags: , , , , , ,
Posted in CHEETAH | No Comments »

Cheetah Mounts Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″

Friday, July 3rd, 2009


Cheetah Mounts Tilt and Swivel Articulating Arm for Plasma LCD TV 32\



Average Rating:
Brand: Cheetah
Model: APSAM2S

Product Description:
The Cheetah Mounts APSAM2 offers 25" extension 180 degrees of swivel and 15 degress of tilt. The APSAM2 is the most economical arm mount on the market. Get the extension and swivel of an arm mount at a price less than many standard flat mounts. The APSAM2 is a truly universal design that will fit virtually any display 32"-55". Specifically, it will fit any hole pattern up to 30" wide and 18" tall. Please Note: Sag and Twist Affect All arm mounts for large displays have sag and twist. When you mount your display, typically weighing between 50 and 100 lbs, the arm will sag. Depending on the weight of the display, how far the arm is extended and how tight the joint bolts are, it may sag as much as 4 inches. Although the sag is noticable, the mount will not break. It is rated at 180 lbs and to achieve this rating it is tested at 360 lbs. Additionally, one side will often sag more than the other. This is twist. You may notice as much as 2 inches of twist on the outside edges of your display. Your arm mount will hold up to 180 lbs, but if you are concerned about sag and twist, you may want to consider one of the dual arm models from Cheetah Mounts sold separately at Amazon. The dual arm designs have significantly less sag and twist. The professional dual arm in particular has less than 1 inch of sag and a rotational TV plate that completely eliminates twist. Product Specifications: Weight Capacity: 180 lbs Tilt: +/- 15 degrees Swivel: 180 degrees 2.5mm steel construction Extended length 25" Folded depth 7" Hole Pattern coverage: 30" wide (762mm) X 18" tall (480mm) 19" Wall plate is 18" wide High Quality Powder Coat Finish 2 cable pass-through holes on wall plate Printed instructions and wall mounting hardware included.

Features:
  • Universal Design Fits Virtually Any Display from 32"-55" up to 180LBS
  • Articulating Arm Extends 25" from the Wall
  • 15 Degrees of Tilt Up or Down
  • 2.5mm Heavy Gauge Cold Steel
  • High Quality Powder Coat Finish
Available at Amazon

Customer Reviews

Tags: , , , , ,
Posted in World Buyer Guide | 2 Comments »

Flat Panel Mounts for Up To 61″ Displays

Thursday, June 25th, 2009


IC IC-LP-FM1S Fixed Wall Mount for 30\


Brand: IC
Model: IC-LP-FM1S

Product Description:
10-22-2007 - Brand New Item. Description - IC MOUNTING SOLUTIONS IC-LP-FM1S Universal Low-Profile Flat-Panel Wall Mount (Silver)

Features:
  • Weight capacity: 175 lbs.
  • Patent-pending Glide Lock design secures TV to wall
  • Strong, low profile desing
  • Heavy gauge construction
Available at Amazon
List Price: USD 159.99

Tags: ,
Posted in World Buyer Guide | 1 Comment »

PEERLESS PLA-1S Plasma Screen Articulating Swivel Mounts

Sunday, April 19th, 2009


PEERLESS PLA-1S Plasma Screen Articulating Swivel Mounts


Brand: Peerless
Model: PLA-1S

Product Description:
PEERLESS PLA-1S Articulating Swivel Plasma Screen Mount (Silver)

Features:
  • Allows multiple viewing positions within the same room
  • 3 pivot points with 180° swivel on arm for infinite number of viewing positions
  • Adjustable screen tilt up to 10°
  • Articulating arm extends up to 28" away from wall, screen sits flush against wall when retracted
  • Multiple attachment points on wall plate, vertical or horizontal screen positioning
Available at Amazon
List Price: USD 499.00

Tags: , , , , , ,
Posted in World Buyer Guide | 3 Comments »

Vixen Direct Wide Photo Adapter for General Type T Mounts

Sunday, March 15th, 2009


Vixen Direct Wide Photo Adapter for General Type T Mounts


Brand: VIXEN
Model: 3878

Product Description:
Will accept most all types of camera "T" mounts and link them to Vixen Telescopes . For Canon Eos cameras use #3876 instead. For Olympus cameras use #3877 instead.

Available at Amazon
List Price: USD 90.00
Lowest New Price: USD 62.95

Tags: , , ,
Posted in World Buyer Guide | No Comments »

CHEETAH MOUNTS LCD TV/MONITOR TILT AND SWIVEL ARTICULATING ARM WALL MOUNT FOR 15-24" UP TO 33LBS SILVER

Wednesday, January 14th, 2009


CHEETAH MOUNTS LCD TV/MONITOR TILT AND SWIVEL ARTICULATING ARM WALL MOUNT FOR 15-24\


In contrast to the complaints of the previous reviewer, mine arrived quickly and nicely packaged. All the contents came in plastic bags and the instructions were clear, albiet brief. The bracket is made of what appears to be aluminum alloy and was very easy to put together; it took me about 15 minutes total to assemble and install on the wall (I had laid out the cables and located a wall stud to mount it on beforehand).

The attachment bracket alighned perfectly to the TV's VESA 100 holes and four screws that came with it were the right size. The swing arms move smoothly and stays in alignment throughout the unit's entire range of motion (the TV is a 19" LCD and weighs about 21 pounds). My only suggestion is to apply some silicon grease to the hinge contact points during assembly to prvent possible binding when you move the position of the TV -- after all, you are are supporting and pivoting a fair amount of weight.

The Cheetah turned out to be a nice suprise because it is a well made and a huge bargain at . This is especially true when you consider that others similar to it sell for 3 to 5 times more.

Average Rating:
Brand: Cheetah

Product Description:
This LCD TV/Monitor arm mount folds up to 2.5" from the wall yet allows you to extend your display up to 14", swivel 180 degrees, and tilt +- 30 degrees. The molded aluminum arms provide strength and a designer look. The TV plate supports VESA 50, 75, and 100 hole patterns. This mount is recommended for dispalys 15" to 24" and weighing up to 33lbs, although it can be used on certain displays up to 32" which use the VESA 100 hole pattern. For most LCD displays in the 26-32" range we recommend Cheetah model ALAMLB. Installation istructions and hardware included.

Features:
  • 14" EXTENSION, +-30 DEGREES TILT, 180 DEGREES SWIVEL
  • FITS 15-24" DISPLAYS, VESA 50, 75, 100, UP TO 33LBS
  • SINGLE STUD INSTALLATION, POWDER COAT PAINT
  • MOLDED ALUMINUM ARMS FOLD TO 2.5" FROM WALL
  • INSTALLATION MANUAL AND ALL HARDWARE INCLUDED
Special Features:
  • Weight 2 lbs
  • Wall Plate Dimensions: 2.5" X 5"
Available at Amazon
List Price: USD 59.99

Customer Reviews


Great Product Super Price.....
sorry to hear about the previous reviewers problems, but I had no problems all the screws fit together like they were supposed to and everything went nicely, Screws were all in one bag and even even had two size VESA screws for different size tvs I guess , the smaller one fit mine, found a stud in the wall and mounted a 19" Insignia in the kitchen. only thing I should have got Black instead of Silver. Great Product for the price. Wal Mart wanted 60 some odd dollars for basically the same thing.

Tags: , , , , , ,
Posted in World Buyer Guide | No Comments »

« Older Entries